to mobile version

Sensor cable multi-pin

Sensor cable multi-pin

Further types

Basic information

Sensor cables provide the electrical connection between the sensor element and the control electronics.
These include the sensor contacts, insulation, cable insulation and the cable connection contact.



  • Everywhere, where sensors must be connected to an evaluation electronics
  • In combination with live conductors
  • Control lines for conveying and lifting equipment
  • Ribbon cables
  • Diverse, customer-specific requirements
  • Sample series
  • Pilot series
  • Small and large series
  • Single wires and strands AWG 30 to AWG 14 corresponding to cross sections between 0.057 to 1.941 mm²
  • Multi-conductor jacketed cables with an outer diameter of up to Ø 10 mm
  • Shielded / unshielded cables
  • Taped or extruded pipe insulation
  • Special Insulation:
    • PVC
    • Silicone
    • Teflon
    • Polyimide
    • PEEK


General function

Sensor cables carry the signal of the sensor element to the connection point of the control electronics. They simultaneously provide full protection of the sensor, the leads and the connectors against mains-voltage carrying circuits as well as against mechanical, chemical and thermal stresses.



  • Perfection for every aspect regarding cables
  • Fulfillment of customer wishes:
    • flexible
    • fast
    • economic
    • reliable
    • within the specified quality standards, and with competent advice and know-how